Question # 1
| Which two criteria must be considered when conducting an outdoor bridge site survey? (Choose two.) | | A. near-far effect
| | B. weather | | C. traffic lights | | D. power lines | | E. Fresnel zone |
B. weather
E. Fresnel zone
Explanation:
When conducting an outdoor bridge site survey, weather and the Fresnel zone are critical criteria to consider. Weather can affect signal propagation and the reliability of the wireless link, while the Fresnel zone relates to the elliptical area around the line-of-sight path between transceivers, which must be clear of obstacles to ensure a strong signal. References: Designing Cisco Enterprise Wireless Networks (ENWLSD 300-425)
Question # 2
| An engineer must perform a Layer 2 survey for a mining facility. Which type of antenna does the engineer use in the mine shaft? | | A. omnidirectional | | B. patch | | C. internal | | D. dipole |
A. omnidirectional
Explanation:
In a mining facility, especially within mine shafts where the environment can be long and narrow, an omnidirectional antenna is typically used for a Layer 2 survey. This type of antenna radiates RF signal equally in all directions, providing coverage along the length of the shaft.
Question # 3
An engineer must perform an assessment of a customer LAN for a future IEEE 802.11ac Wave 2 wireless deployment All access switches are Fast Ethernet-Capable only, and the wired infrastructure between existing APs and access switches is based on the CAT 6A standard. Which two actions provide maximum support of Cisco 3800 Series access points? (Choose two.)
| | A. Replace the existing switches with mGig switches. | | B. Replace the existing switches with gigabit switches with 10G uplinks. | | C. Ensure that cable distances between access switches and APs are not longer than 100 meters. | | D. Replace the existing wiring infrastructure with the CAT-7E wiring standard, | | E. Ensure that cable distances between access switches and APs are not longer than 55 meters. |
A. Replace the existing switches with mGig switches.
B. Replace the existing switches with gigabit switches with 10G uplinks.
Explanation:
Cisco 3800 Series APs support higher speeds provided by IEEE 802.11ac Wave 2, which Fast Ethernet switches cannot fully support. Replacing them with mGig or gigabit switches with 10G uplinks will ensure the infrastructure can handle the increased data rates. The CAT 6A standard supports these speeds, so there’s no need to replace the wiring if it’s already CAT 6A.
Question # 4
| An engineer is designing a solution where guests terminate on an anchor controller in the DMZ. The engineer is having issues and wants to test connectivity between members of a mobility group. Which command must be issued to test whether a mobility control packet is able to be reached over the management interface? | | A. show logging | | B. mapping | | C. mapping | | D. tracert |
D. tracert
Explanation:
The ‘tracert’ command is used to test connectivity between members of a mobility group by tracing the path that mobility control packets take over the network. This command helps identify any potential issues with the route that the packets are taking, which could affect the ability of guests to connect to the anchor controller in the DMZ. References := (CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide Premium Edition and Practice)
Question # 5
| A customer has a centralized wireless deployment with N+1 high availability and few open authentication SSIDs configured. After fail over, all APs are broadcasting all SSIDs, but the clients are assigned IP addresses from a different subnet. The WLANs on both WLCs are configured with the same dynamic interfaces. Which feature must be incorporated in the wireless design of the second controller? | | A. RF Protocol | | B. AP Groups | | C. VLAN Select | | D. AAA Override |
C. VLAN Select
Explanation:
VLAN Select is a feature that allows for the assignment of clients to different VLANs based on various criteria, such as user credentials or device type. In a centralized wireless deployment with N+1 high availability, incorporating VLAN Select can ensure that clients maintain consistent IP addressing across failovers, preventing them from being assigned IP addresses from a different subnet.
Question # 6
| Which three pieces of equipment are needed to conduct a fully measured wireless survey? (Choose three.) | | A. PoE battery | | B. spirit level | | C. access point | | D. tall tripod | | E. goggles |
A. PoE battery
C. access point
Explanation:
A fully measured wireless survey requires tools that support the active functioning of the network and allow for physical access to install and measure equipment. A PoE (Power over Ethernet) battery is necessary to power the access point during the survey. The access point itself is essential for broadcasting the signal. A ladder is needed to reach high places for proper access point placement and to measure coverage areas effectively.
References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide
https://www.cisco.com/c/en/us/td/docs/wireless/technology/mesh/81/design/guide/b_mesh_81/Site_Preparation_and_Planning.html
Question # 7
| An engineer is trying to configure the APs installed in a new auditorium to use 40 MHz channels with high data rates and lower TX power. The APs in the building hallway must use lower-density design settings configured for the rest of the building. Which two configurations achieve this design? (Choose two.) | | A. TPC | | B. DCA | | C. RRM | | D. RF protocol |
C. RRM
D. RF protocol
Explanation:
AP groups allow the engineer to apply different policies for APs in the auditorium versus those in the hallway. RRM (Radio Resource Management) can dynamically adjust the TX power and channel settings to optimize the wireless coverage and capacity.
Cisco 300-425 Exam Dumps
5 out of 5
Pass Your Designing Cisco Enterprise Wireless Networks (ENWLSD) Exam in First Attempt With 300-425 Exam Dumps. Real CCNP Enterprise Exam Questions As in Actual Exam!
— 196 Questions With Valid Answers
— Updation Date : 9-Dec-2024
— Free 300-425 Updates for 90 Days
— 98% Designing Cisco Enterprise Wireless Networks (ENWLSD) Exam Passing Rate
PDF Only Price 99.99$
19.99$
Buy PDF
Speciality
Additional Information
Testimonials
Related Exams
- Number 1 Cisco CCNP Enterprise study material online
- Regular 300-425 dumps updates for free.
- Designing Cisco Enterprise Wireless Networks (ENWLSD) Practice exam questions with their answers and explaination.
- Our commitment to your success continues through your exam with 24/7 support.
- Free 300-425 exam dumps updates for 90 days
- 97% more cost effective than traditional training
- Designing Cisco Enterprise Wireless Networks (ENWLSD) Practice test to boost your knowledge
- 100% correct CCNP Enterprise questions answers compiled by senior IT professionals
Cisco 300-425 Braindumps
Realbraindumps.com is providing CCNP Enterprise 300-425 braindumps which are accurate and of high-quality verified by the team of experts. The Cisco 300-425 dumps are comprised of Designing Cisco Enterprise Wireless Networks (ENWLSD) questions answers available in printable PDF files and online practice test formats. Our best recommended and an economical package is CCNP Enterprise PDF file + test engine discount package along with 3 months free updates of 300-425 exam questions. We have compiled CCNP Enterprise exam dumps question answers pdf file for you so that you can easily prepare for your exam. Our Cisco braindumps will help you in exam. Obtaining valuable professional Cisco CCNP Enterprise certifications with 300-425 exam questions answers will always be beneficial to IT professionals by enhancing their knowledge and boosting their career.
Yes, really its not as tougher as before. Websites like Realbraindumps.com are playing a significant role to make this possible in this competitive world to pass exams with help of CCNP Enterprise 300-425 dumps questions. We are here to encourage your ambition and helping you in all possible ways. Our excellent and incomparable Cisco Designing Cisco Enterprise Wireless Networks (ENWLSD) exam questions answers study material will help you to get through your certification 300-425 exam braindumps in the first attempt.
Pass Exam With Cisco CCNP Enterprise Dumps. We at Realbraindumps are committed to provide you Designing Cisco Enterprise Wireless Networks (ENWLSD) braindumps questions answers online. We recommend you to prepare from our study material and boost your knowledge. You can also get discount on our Cisco 300-425 dumps. Just talk with our support representatives and ask for special discount on CCNP Enterprise exam braindumps. We have latest 300-425 exam dumps having all Cisco Designing Cisco Enterprise Wireless Networks (ENWLSD) dumps questions written to the highest standards of technical accuracy and can be instantly downloaded and accessed by the candidates when once purchased. Practicing Online CCNP Enterprise 300-425 braindumps will help you to get wholly prepared and familiar with the real exam condition. Free CCNP Enterprise exam braindumps demos are available for your satisfaction before purchase order.
Send us mail if you want to check Cisco 300-425 Designing Cisco Enterprise Wireless Networks (ENWLSD) DEMO before your purchase and our support team will send you in email.
If you don't find your dumps here then you can request what you need and we shall provide it to you.
Bulk Packages
$60
- Get 3 Exams PDF
- Get $33 Discount
- Mention Exam Codes in Payment Description.
Buy 3 Exams PDF
$90
- Get 5 Exams PDF
- Get $65 Discount
- Mention Exam Codes in Payment Description.
Buy 5 Exams PDF
$110
- Get 5 Exams PDF + Test Engine
- Get $105 Discount
- Mention Exam Codes in Payment Description.
Buy 5 Exams PDF + Engine
 Jessica Doe
CCNP Enterprise
We are providing Cisco 300-425 Braindumps with practice exam question answers. These will help you to prepare your Designing Cisco Enterprise Wireless Networks (ENWLSD) exam. Buy CCNP Enterprise 300-425 dumps and boost your knowledge.
| 
